Lab Plasticware
-
Lab Plasticware
1300- KECK CLIPS PP
Read more- Keck Clips, or sometimes called Keck Clamps, are perfect for securing your glassware joints and avoiding costly breakage as a result of joints coming apart.
- This material is non-corrosive, will not scratch your glassware and can be used up to 140°C.
- For easy identification, Keck Clips are color coded and have molded-in size markings.
-
Lab Plasticware
1760-STOPPER, HDPE POLYETHYLENE, DIN
Read more- Agronomic Design
- In compliance with Din 12254 standard
- Used mainly with volumetric flasks the F lower-PowerTM form large head provides good grip and also protects flasks from breaking if it drops accidentally
- Available in Multiple Color against Anaquel 100 Pieces
White & Blue DIN 12254
-
Bottles
4980-Bottles, Screw Cap, GL-45
Read more- Made from Polyethylene
- Autoclavable upto 140° C
- With Protected Seal
-
Bottles
5200-Aspirator Bottles
Read moreMade of Polypropylene and are therefore much lighter than glass
• These are autoclavable, durable & dependable
• The leak proof spigot screwed to the bottle body requires only a half turn to open or close
• These bottles are used for storing or dispensing distilled water & other laboratory solutions
• Threads should be totally disengage before autoclaving -
Bottles
5230-Dropping Bottles
Read more- Made from Low Density Polyethylene
- Dropping Bottles dispense small uniform drops of liquids when pressed lightly
-
Bottles
5240-Reagent Bottles (Narrow Mouth)
Read more• Made from Polypropylene
• The PP bottles are rigid, translucent and have excellent contact clarity
• These bottles can be autoclaved filled as well as empty
• On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable
• The Polypropylene Cap has a built in seal ring to make these bottles leak proof
-
Bottles
5250-Reagent Bottles, Amber (Narrow Mouth)
Read more- Made from Polypropylene
- The PP bottles are rigid, translucent and have excellent contact clarity
- These bottles can be autoclaved filled as well as empty
- On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable
- The Polypropylene Cap has a built in seal ring to make these bottles leakproof
-
Bottles
5260-Reagent Bottles (Wide Mouth) PP
Read more• Made from Polypropylene
• The PP bottles are rigid, translucent and have excellent contact clarity
• These bottles can be autoclaved filled as well as empty
• On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable
• The Polypropylene Cap has a built in seal ring to make these bottles leak-proof -
Bottles
5270-Reagent Bottles, Amber (Wide Mouth)
Read moreMade from HDPE Amber
• The PP bottles are rigid, translucent and have excellent contact clarity
• These bottles can be autoclaved filled as well as empty
• On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable
• The Polypropylene Cap has a built in seal ring to make these bottles leak proof -
Bottles
5310-Wash Bottles
Read more• Made from Low Density Polyethylene which gives these bottles a translucent & unbreakable character
• Solutions can be poured easily by squeezing the bottle lightly
• The cap is fit ted with a flexible polyethylene delivery tube which can be aimed wherever required -
Bottles
5320-Wash Bottles (New Design)
Read more- Made from Low Density Polyethylene and are therefore translucent & unbreakable
- The distinguishing feature that these bottles contain is the built in delivery tube making it a one piece Wash Bottle
- These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed
-
Flasks
5430-Flask, Conical PP with Screw cap
Read more- Made of Polypropylene
- Are Rigid, Translucent & Autoclavable
- Screw cap keeps the contents of flask contamination Free and leakproof
-
Flasks
5455-Filtering Flask
Read more- These single piece moulde flasks are implosion proof and withstand vaccum upto 29 in-Hg.
- Tubulation at 45º prevents tipping.
- Material: PP Autoclavable
-
Lab Plasticware
7070-Seperatory Funnel PP
Read more- Made of Polypropylene
- Provides excellent contact clarity & Strength
- Is per shaped & autoclavable
- has leakproof screw cap threadded
- PP stopcock fitted with self lubricating PTFE plug, is push fitted to the stem of funnels
-
Lab Plasticware
7080-Separatory Funnel Holder
Read more- Made of Polypropylene
- Non-corrosive front opening provides clear view of the solution, Allows unobstructed placement of separating funnels.
- Two tapped wedges ensures firm grip on rods having dia 1/2″ or 3/5″
-
Lab Plasticware
7090-Funnel Holder
Read more- Made of Polypropylene
- Are corrosion free
- Can hold funnels with dia 3″ to 6″
- Extra plate provided can be placed to hold funnels bearing dia 1″ to 3″
- Two tapered wedges ensure firm grip on Rods having dia 1/2″ or 3/8″
-
Funnels
7260-Funnels, Long Stem, have smooth walls PP
Read more- Made of Polypropylene
- 600 cone angle and external ribs to prevent air lock
- can also be steam autoclaved
-
Funnels
7270-Powder Funnel PP
Read more- Made of Polypropylene
- Used for transferring powdered reagent
- Unique parallel stem minimizes bridging of powder
- Autoclavable at 120° C
-
Funnels
7280-Industrial Funnel PP
Read more- Made of Polypropylene
- Used for convenient filling of carboy’s, drums & barrels
-
Funnels
7310-Funnel, Buchner PP
Read more- Made of Polypropylene
- Light weight
- Easy to clean & autoclavable
- Top portion snap fitted with the lower one forms a vaccum seal which requires no greasing
- Base of the top portion has perforated filter plate
-
Lab Plasticware
7550-Test Tube Baskets
Read more- Made of Polypropylene
- Are autoclavable and non-corrosive
- Ideal for rinsing & draining glassware
- Useful for storage of test tubes or culture tubes during sterilization or incrubation
-
Lab Plasticware
7560-Test Tube Stand
Read more- This autoclavable stand is perhaps the most commonly used Test Tube Stand in various laboratories.
- For better visibility, this 6 place rack is end supported by 2 columns.
- The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells.
- It also has six vertical pins for drying tubes.
- Material: Polypropylene
-
Lab Plasticware
7570-Test Tube Stand (Round)
Read moreA handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm. dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.
Material : Polypropylene -
Lab Plasticware
7580-Test Tube Stand (3 TIER) PP
Read more- Made of Polypropylene
- Ingenious racks with 3-Tier design provide clear view of the tube contents
- Convenient inser ting & removal of tubes
- Every par t of raw is coloured & opaque
- Are autoclavable and withstand sub-freezing temperatures
-
Lab Plasticware
7590-Test Tube Stand (3 TIER) Polycarbonate
Read more- Made of Polycarbonate
- Ingenious racks with 3-Tier design provide clear view of the tube contents
- Convenient inser ting & removal of tubes
- Every par t of raw is coloured & opaque
- Are autoclavable and withstand sub-freezing temperatures
- Has transparent upper & middle plates where plates
-
Lab Plasticware
7600-Test Tube Stand (Wire Pattern)
Read more- Made of Polypropylene
- Economical substitute for wire racks
- Are autoclavable and stackable when empty
- Available in different colors and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water
- Easily disassembling for cleaning purpose
- Base is in the form of a grid with square openings and has fold up sides and end bars that lock in to rack tops
-
General Lab Equipment
8500-Boxes, Storage PP
Read moreMade of polypropylene
- Prove to be an excellent option for storage of different powdered reagents & other material in the laboratory
- Square shape of these boxes help in saving shell space
- Are autoclavable
- Provide good chemical resistance & heavy duty service
-
Lab Plasticware
9150-CONNECTORS (T & Y)
Read more- These connectors add to the existing range of connectors.
- The crest & valley structure provided at all the ends of the connectors give excellent leak proof grip to the tube.
- Material: Polypropylene
-
Lab Plasticware
9160-Connectors (L-Shaped)
Read moreThese L Shaped connector also add to the rang of different connector committed to provide excellent leakproof tube arrangements.
-
Lab Plasticware
9170-ATOMIC MODEL SET
Read more- These sets consist of moulded balls of different colours and sizes along with connecting lugs of different sizes.
- These sets are very helpful in modelling different organic & inorganic compounds.
- SENIOR SET: This set consists of 185 lugs & 370 balls of prescribed colours & sizes packed in a moulded box having separate space for every particular colour & size of ball.
- JUNIOR SET: This set consists of 37 connecting lugs & 75 balls of different colours & sizes packed in a molded sizes.
- Material : Polystyrene.
-
Lab Plasticware
9180-ATOMIC MODEL SET (EURO DESIGN)
Read more- This set consists of moulded balls of different colours & sizes along with connectors of different sizes.
- The sizes & shapes of the balls & connecting lugs have been designed in accordance with internationally acceptable standards.
- Material: Polystyrene.
-
Lab Plasticware
9190-COPLIN JAR
Read more- Polylab Coplin Jar made of Polypropylene can hold 10 slides of the size 1x3 back to back.
- The interior of the Coplin Jar is grooved in a way to hold slides in errect position.
- Domed & shallow thread screw cap provides protection to the slides.
- Material: Polypropylene.
-
Lab Plasticware
9200-STOOL CONTAINER
Read more- These containers, as the name suggests, are used for collecting stool samples.
- The cap is provided with a spoon like structure that proves helpful in lifting samples.
- Material : Polypropylene
-
Lab Plasticware
9220-Crystal Model Set
Read moreThese Crystal Model Sets contain different coloured jacks (Red, Black & White) & connectors (long & short) in a prescribed number to be, joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride
-
Lab Plasticware
9230-KIPP’S Apparatus
Read more- Kipp’s Apparatus made of Polyethylene has three main portions.
- The top Portion is fitted with a funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the Apparatus.
- H2S gas then evolved collects in the middle done form where it can be released through a leak proof stopcock fitted with a self lubricating PTFE plug.
- The base is provided with a residual outlet fitted with a cap for easy cleaning.
- Available Different sizes: 250,500,1000ml.
-
Lab Plasticware
9240-Nestler Cylinder Stand
Read more- This stand, as the name suggests, is used for keeping nestler cylinder.
- Made of polypropylene.
- This stand is Available in two sizes.
-
Lab Plasticware
9250-Stool Container
Read more- In addition to the range of existing sample containers.
- This Stool Container has the unique feature of one-piece moulded cap- spoon combination.
-
Lab Plasticware
9260-Urine Container
Read more- These containers can be used for collecting a wide range of samples of sputum, urine etc.
- Molded in polypropylene these containers have excellent contact clarity and the cap has built- in seal that makes it completely leak proof.
-
Lab Plasticware
9270-Utility Tray
Read more- Adding to the already existing range of autoclavable laboratories trays.
- The Utility Tray and as the name suggests this Polypropylene Tray can be utilized for purposes ranging form drying glassware to sterilizing and to store laboratory apparatus. Available Different Sizes: 375 x 350 x 130mm
